Professional AC Maintenance Services vs DIY

Heater quit in winter? Stay safe and warm with these quick steps—and count on C&C Service for fast, reliable emergency heating repair when you need it most.

Is your heating system failing? Learn the key signs it’s time for a replacement and stay warm with expert installation services from C & C Service.

Prevent costly heating emergencies with routine HVAC maintenance. C & C Service offers expert inspections to keep your system running smoothly year-round.

If you recently had a new heating system installed in your home, there are some steps you can take to help protect its longevity. C&C Service will send a professional to complete the installation and run diagnostics to make sure the system functions properly. Here are some things to do after a new heating system installation: Turn It on and Test the Settings Turning on the heater after a heating system installation helps make sure it has been appropriately connected and receives power. Completing diagnostic tests early helps identify issues quickly, which could prevent problems in the future. During the installation process, C&C Service contractors test the system’s functioning to verify all parts are working. Some tests include: Thermostat: Testing different thermostat settings confirms that the sensors receive the signal to turn on the system and your home reaches the programmed temperature. Fan: Turning on the blower fan establishes that heat consistently exits vents throughout the home. Connection points: Technicians review electrical and gas connection points to make sure there are no leaks or fire hazards when the system is running or idle.  Check the Vents Checking that your vents are open and unobstructed helps disperse heat throughout your home. Clear any debris or objects around vents, as this can block airflow and lead to uneven heating. Many technicians also recommend keeping the furnace area clean of dust and clutter. Dust may clog the sensors that help the heating system run efficiently, while clutter can be a fire hazard. Conduct Regular At-Home Maintenance Completing regular maintenance tasks at home helps increase the longevity of your new heating system. Our installation team will review model-specific tasks with you to promote the health of your heating system. Most systems require air filters that prevent excessive dust and particles from passing through your heating system and circulating through the home. These should be changed every one to three months, as clogged air filters can impact the airflow and air quality in your home. Schedule Regular Professional Maintenance After C&C Service completes a new heater installation, schedule seasonal maintenance and tune-ups to verify your heater is working correctly and prepared to withstand the cold months. Experts check heater parts, like the fan and the motor, to make sure they work as expected. They can also clean your system to help prevent future costly mechanical problems. Service technicians also monitor performance and make any necessary adjustments to thermostat functions or part placement. Schedule a Heating System Installation Today If you have an old system and are worried it may not last through another winter, it may be time for a new heating system. The professionals at C&C Service help you determine the right unit for your home based on size and heating needs. After installation, they will provide advice and tips on properly caring for and maintaining your unit. These tips may include checking thermostat settings, clearing vents from debris, and regularly replacing the air filters. Contact us today to schedule seasonal service or a system installation.

Stay warm and safe with C & C Service. Watch for signs like uneven heating, high energy bills, or strange noises.

Emergency heating repair services provide a safety net when your furnace unit malfunctions during winter.

If your home's temperature is inconsistent and your HVAC system has mechanical issues, it may be time to upgrade your heating system.

Restore home comfort with emergency heating repairs from C&C Service. Learn common heating issues and how to address them.

Confirming your heating system is in top condition is necessary for the colder months. A well-maintained HVAC system can potentially reduce utility expenses and avoid expensive repairs down the road. C & C Service performs HVAC maintenance and heating system installation to help your home stay warm. Here are six steps for maintaining a heating system:  Step 1: Inspect and Replace Filters Regularly Installing clean filters is a simple yet effective way to maintain your heating system. Home air filters trap dust, dirt, and small debris that can create clogs over time. This can reduce airflow, causing your heating system to work harder and increasing energy consumption. Debris initially trapped by the filter might also become dislodged and begin to circulate throughout the home, decreasing the indoor air quality. Inspect your filters every one to three months to prevent airflow disruptions. If a filter looks clogged or dirty, replace it. If you have pets or sensitive allergies, you might need to change air filters more often. A high-quality filter helps improve the HVAC system’s efficiency and prolong its life. Step 2: Check the Thermostat Your thermostat helps regulate the temperature of your home. If your home does not heat evenly, especially after a heating system installation , it might be because your thermostat is not working correctly. Make sure the thermostat is set to “heat” and an appropriate temperature for your home. A smart thermostat may adjust to preset temperatures based on a schedule, helping make sure your system is running when needed. Correctly calibrating your thermostat can provide accurate temperature readings. Step 3: Clean and Maintain Vents and Ductwork Over time, dust, dirt, and debris can gather in the ducts. These obstacles often cause restricted airflow and inefficient heating. If your system does not get enough airflow, it may overheat or run longer than necessary. A deep clean usually takes place every three to five years. If residents suffer from respiratory problems, such as asthma or allergies, the ducts should be cleaned every two to three years to prevent buildup. A service technician should clean ductwork and vents after home renovations or signs of blockage. Step 4: Inspect the System’s Flame and Burner You should monitor the burner and flame if your heating system has a furnace. If not properly cared for, the burner can become dirty, and the flame color can change. A furnace flame should be blue, which indicates that your system is burning cleanly and efficiently. A dirty burner may reduce efficiency, leading to higher energy consumption. Step 5: Test the System Before Cold Weather Testing your heating system allows you to thoroughly inspect it and locate components that need to be replaced or repaired. Turn your heater on and listen for unusual noises and smells. Early detection of complications helps prevent unexpected breakdowns. Testing before cold temperatures set in also gives you time to schedule any necessary services. Step 6: Schedule Annual System Maintenance While you can complete some maintenance tasks yourself, scheduling a yearly inspection with a professional helps make sure that your unit is correctly cared for. Certified technicians perform a thorough inspection of your system. They test for signs of wear, address any potential issues, and confirm that everything runs as efficiently as possible. Professional Heating System Installation and Maintenance Maintaining your heating and cooling systems can help prevent breakdowns and avoid costly repairs. Inspect your air filters and clean the ductwork throughout your home to keep your system running smoothly. Following the advice from your C & C Service technician will help your home stay warm this winter. Call us today to schedule a routine system inspection.